Concept skos:Concept Code ID.AM-08.9

Maintenance tools and portable storage devices shall be inspected as they enter the facility and shall be protected by anti-malware solutions that scan them for malicious code before they are used on the organisation's systems.

Also known as

skos:altLabel

Maintenance tools malware inspection

Note

skos:note

The goal of this control is to prevent the introduction of malicious code into organisational systems, by ensuring that all maintenance tools and portable storage devices are inspected and scanned before use. In OT environ- ments, introducing unverified tools or storage devices can compromise system integrity and disrupt critical physical operations. To achieve this goal, the organisation should:

  • Inspect on Entry: Maintenance tools and portable storage devices should be inspected when entering the facility, to detect unauthorised or suspicious items.
  • Scan for Malware: All devices should be scanned using up-to-date anti-malware solutions before being connected to organisational systems.
  • Apply to All Tool Types: This includes software tools (e.g. diagnostic software, firmware updaters, config- uration tools, remote access tools), portable storage (e.g. USB drives, external hard drives, SD cards), and hardware tools (e.g. laptops, tablets, portable diagnostic devices).
  • Use Non-Destructive Clean-Up: When devices are newly acquired or lack a trusted chain of custody, non- destructive sanitisation techniques should be applied before first use.
  • Ensure Conformance and Compliance: All actions should conform to internal procedures and comply with applicable cybersecurity regulations and industry standards.

Place in the list

For people working with the data

Identifier (URI) http://cyfun.data.gift/data/requirement_ID_AM_08_9
All data (21 statements)

Properties and relations

Direct links from the subject.

Property Value

type

The subject is an instance of a class.

http://cyfun.data.gift/ontology#Requirement

type

The subject is an instance of a class.

Concept

An idea or notion; a unit of thought.

label

A human-readable name for the subject.

ID.AM-08.9: Maintenance tools and portable storage devices shall be inspected as they enter the facility and shall be protected by anti-malware solutions that scan them for malicious code before they are used on the organisation's systems.

http://cyfun.data.gift/ontology#requirementId

ID.AM-08.9

http://cyfun.data.gift/ontology#foundIn

http://cyfun.data.gift/data/loc_CyFun2025_Booklet_ESSENTIAL_E_p60

has broader

Relates a concept to a concept that is more general in meaning.

http://cyfun.data.gift/data/subcategory_ID.AM-08

note

A general note, for any purpose.

The goal of this control is to prevent the introduction of malicious code into organisational systems, by ensuring that all maintenance tools and portable storage devices are inspected and scanned before use. In OT environ- ments, introducing unverified tools or storage devices can compromise system integrity and disrupt critical physical operations. To achieve this goal, the organisation should: - Inspect on Entry: Maintenance tools and portable storage devices should be inspected when entering the facility, to detect unauthorised or suspicious items. - Scan for Malware: All devices should be scanned using up-to-date anti-malware solutions before being connected to organisational systems. - Apply to All Tool Types: This includes software tools (e.g. diagnostic software, firmware updaters, config- uration tools, remote access tools), portable storage (e.g. USB drives, external hard drives, SD cards), and hardware tools (e.g. laptops, tablets, portable diagnostic devices). - Use Non-Destructive Clean-Up: When devices are newly acquired or lack a trusted chain of custody, non- destructive sanitisation techniques should be applied before first use. - Ensure Conformance and Compliance: All actions should conform to internal procedures and comply with applicable cybersecurity regulations and industry standards.

note

A general note, for any purpose.

<div><p>The goal of this control is to prevent the introduction of malicious code into organisational systems, by ensuring that all maintenance tools and portable storage devices are inspected and scanned before use. In OT environ- ments, introducing unverified tools or storage devices can compromise system integrity and disrupt critical physical operations. To achieve this goal, the organisation should:</p><ul><li>Inspect on Entry: Maintenance tools and portable storage devices should be inspected when entering the facility, to detect unauthorised or suspicious items.</li><li>Scan for Malware: All devices should be scanned using up-to-date anti-malware solutions before being connected to organisational systems.</li><li>Apply to All Tool Types: This includes software tools (e.g. diagnostic software, firmware updaters, config- uration tools, remote access tools), portable storage (e.g. USB drives, external hard drives, SD cards), and hardware tools (e.g. laptops, tablets, portable diagnostic devices).</li><li>Use Non-Destructive Clean-Up: When devices are newly acquired or lack a trusted chain of custody, non- destructive sanitisation techniques should be applied before first use.</li><li>Ensure Conformance and Compliance: All actions should conform to internal procedures and comply with applicable cybersecurity regulations and industry standards.</li></ul></div>

note

A general note, for any purpose.

The goal of this control is to prevent the introduction of malicious code into organisational systems, by ensuring that all maintenance tools and portable storage devices are inspected and scanned before use. In OT environ- ments, introducing unverified tools or storage devices can compromise system integrity and disrupt critical physical operations. To achieve this goal, the organisation should: - Inspect on Entry: Maintenance tools and portable storage devices should be inspected when entering the facility, to detect unauthorised or suspicious items. - Scan for Malware: All devices should be scanned using up-to-date anti-malware solutions before being connected to organisational systems. - Apply to All Tool Types: This includes software tools (e.g. diagnostic software, firmware updaters, config- uration tools, remote access tools), portable storage (e.g. USB drives, external hard drives, SD cards), and hardware tools (e.g. laptops, tablets, portable diagnostic devices). - Use Non-Destructive Clean-Up: When devices are newly acquired or lack a trusted chain of custody, non- destructive sanitisation techniques should be applied before first use. - Ensure Conformance and Compliance: All actions should conform to internal procedures and comply with applicable cybersecurity regulations and industry standards.

note

A general note, for any purpose.

The goal of this control is to prevent the introduction of malicious code into organisational systems, by ensuring that all maintenance tools and portable storage devices are inspected and scanned before use. In OT environ- ments, introducing unverified tools or storage devices can compromise system integrity and disrupt critical physical operations. To achieve this goal, the organisation should: • Inspect on Entry: Maintenance tools and portable storage devices should be inspected when entering the facility, to detect unauthorised or suspicious items. • Scan for Malware: All devices should be scanned using up-to-date anti-malware solutions before being connected to organisational systems. • Apply to All Tool Types: This includes software tools (e.g. diagnostic software, firmware updaters, config- uration tools, remote access tools), portable storage (e.g. USB drives, external hard drives, SD cards), and hardware tools (e.g. laptops, tablets, portable diagnostic devices). • Use Non-Destructive Clean-Up: When devices are newly acquired or lack a trusted chain of custody, non- destructive sanitisation techniques should be applied before first use. • Ensure Conformance and Compliance: All actions should conform to internal procedures and comply with applicable cybersecurity regulations and industry standards.

notation

A notation, also known as classification code, is a string of characters such as "T58.5" or "303.4833" used to uniquely identify a concept within the scope of a given concept scheme.

ID.AM-08.9

alternative label

skos:prefLabel, skos:altLabel and skos:hiddenLabel are pairwise disjoint properties.

Maintenance tools malware inspection

preferred label

A resource has no more than one value of skos:prefLabel per language tag, and no more than one value of skos:prefLabel without language tag.

Maintenance tools and portable storage devices shall be inspected as they enter the facility and shall be protected by anti-malware solutions that scan them for malicious code before they are used on the organisation's systems.

is in scheme

Relates a resource (for example a concept) to a concept scheme in which it is included.

http://cyfun.data.gift/data/CyFun2025

is in scheme

Relates a resource (for example a concept) to a concept scheme in which it is included.

http://cyfun.data.gift/data/CyFun2025_KeyMeasures

is in scheme

Relates a resource (for example a concept) to a concept scheme in which it is included.

http://cyfun.data.gift/data/CyFun2025_delta_IMPORTANT_to_ESSENTIAL

is in scheme

Relates a resource (for example a concept) to a concept scheme in which it is included.

http://cyfun.data.gift/data/CyFun2025_ESSENTIAL

http://cyfun.data.gift/ontology#level

http://cyfun.data.gift/data/level_ESSENTIAL

http://cyfun.data.gift/ontology#isKeyMeasure

1

triple count

The number of triples associated with the subject.

19

in dataset

Specifies the dataset the subject is part of.

http://data.gift/d/datasets/69E8863AA6CE46D9ACD13109

Resultaten 1 - 21 of 21

References

Inverse links to the subject.